4700 E MAIN ST 666

Construction of 355 sq ft livable addition with attached 120 sq ft storage under new awning with ceiling joists, electric and plumbing for bathroom, washer and dryer on raised deck. Awning engineering provided by Carl Putnam no. 39702, expires 9-30-27. 200 sq ft parking area and 104 sq ft covered deck. Type V-B construction. No deferred items. No special inspections. Minimum of one 9-ft x 18-ft unobstructed paved parking space required behind front setback on 2-in asphalt or 4-in concrete. Minimum setbacks are 3-ft front, 5-ft rear, 18-in sides for lots less than 35-ft wide. Accessory structures do not exceed 100 percent of the Park Model floor area. Accessory structures shall be removed within 60 days of removal of the Park Model. Per section 11-34-2.a of the Mesa Zoning Ordinance, amended in July 2025. Reference PMT26-13249 for existing Park Model. Minimum required inspections - footing, stem, strap and sheer, frame, mechanical rough-in, electric rough-in, plumbing rough-in, insulation, drywall shear and final. If needed, underground plumbing. Approved as noted.

Construction of 290 sq ft livable addition with attached 69 sq ft storage under new awning, ICC2621-P, with ceiling joists, electric and plumbing for bathroom, washer and dryer on raised deck. 190 sq ft parking area and 80 sq ft covered deck. Type V-B construction. No deferred items. No special inspections. Minimum of one 9-ft x 18-ft unobstructed paved parking space required behind front setback on 2-in asphalt or 4-in concrete. Minimum setbacks are 3-ft front, 3-ft rear with 6-ft between structures, 3-ft sides. Accessory structures do not exceed 100 percent of the Park Model floor area. Accessory structures shall be removed within 60 days of removal of the Park Model. Per section 11-34-2.a of the Mesa Zoning Ordinance, amended in July 2025. Reference PMT23-10030 for existing Park Model. Minimum required inspections - footing, stem, strap and sheer, frame, mechanical rough-in, electric rough-in, plumbing rough-in, insulation, drywall shear and final. If needed, underground plumbing. Approved as noted.

Construction of a new 246 SF livable accessory structure, 110 SF attached storage room, 200 SF awning for parking area and 152 SF non-livable covered deck. Type V-B construction. No upgrade to utilities. No deferred items. No special inspections. Awning engineering provided by Carl Putnam, No. 39702, expires 9-30-27. Minimum of one 9-ft x 18-ft unobstructed paved parking space required behind front setback on 2-in asphalt or 4-in concrete. 35-ft x 48-ft interior lot. Minimum setbacks are 3-ft front measured from edge of asphalt, 3-ft rear, 3-ft sides. Accessory structures do not exceed 100 percent of the Park Model floor area. Accessory structures shall be removed within 60 days of removal of the Park Model. Per section 11-34-2(a) of the Mesa Zoning Ordinance, amended in July 2025. Reference PMT26-07826 for existing Park Model. Park models are governed by the State of Arizona’s Office of Manufactured Housing (OMH). Any modifications to premanufactured structures shall go through OMH. All construction extending outside premanufactured structures are governed by the City of Mesa. Minimum required inspections: Footing, stem, strap/shear, frame, insulation, drywall shear, and final. If needed, underground electrical and plumbing.

INSTALLATION OF 12.08-FT X 34.08-FT 2026 CAVCO TUSCANY PARK MODEL VIN NO. CFPUS3440V1211646 WITH AC IN REAR. NO GAS OR LP TANKS. NO AWNING. NO OTHER ACCESSORY STRUCTURES AT THIS TIME. MINIMUM ONE 9-FT X 18-FT UNOBSTRUCTED PAVED PARKING SPACE REQUIRED ON 2 INCH ASPHALT OR 4 INCH CONCRETE BEHIND FRONT SETBACK. 33-FT X 63-FT PERIMETER LOT. MININMUM SETBACKS ARE 3-FT FRONT, 5-FT REAR, 18-IN SIDES FOR SPACES LESS THAN 35-FT WIDE. APPROVED AS NOTED.